Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

electroosmotic flow profile in comsol

Please login with a confirmed email address before reporting spam

Hey all:

I am trying to simulate electroosmotic flow in microfluidic channels. My electroosmotic flow does not look normal and it has a higher velocity close to the wall and a lower velocity in the center of the channel. Theoretically, the electroosmotic flow should have a flat profile. I checked everything with the old comsol library model "electrokinetic flow in biochip"3.5a and also a youtube video online about biochip simulation in a more recent version. Everything in my simulation looks ok but the flow profile looks weird.

Does anyone know why the ellectroosmotic flow is not a flat profile in comsol or I messed it up? I attached my mph file here just in case if anyone wants to see it.

Thanks!
Best reagrds
Lian


0 Replies Last Post Oct 26, 2013, 11:40 p.m. EDT
COMSOL Moderator

Hello Lian Yi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.