Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Previously created model which runs perfectly with 4.2a can't be solved by 4.3a

Please login with a confirmed email address before reporting spam

Dear all,

I created a model with 4.2a and everything goes smoothly. Now I'm using 4.3a, and the model doesn't solve. The solver settings are the same, the default MUMPS. Now appears the warning:

Warning: MUMPS allocation factor increased to 1.44.

and keeps increasing. Any ideas?

Thanks!
--
Pu, ZHANG ??
Departamento de Física Teórica de la Materia Condensada,
Universidad Autónoma de Madrid,
Madrid, Spain.

1 Reply Last Post Feb 12, 2015, 3:37 a.m. EST
COMSOL Moderator

Hello Pu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 10 years ago Feb 12, 2015, 3:37 a.m. EST
Try increasing MUMPS factor manually. Also One can try reducing Pivot threshold (say from 0.1 to 0.01).
Try increasing MUMPS factor manually. Also One can try reducing Pivot threshold (say from 0.1 to 0.01).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.