Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Question about modeling layered plates thermal stress

Posted Nov 9, 2013, 4:01 p.m. EST MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.3b 0 Replies

Arthur Chuang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

So, I'm pretty new to using Comsol in modeling. My goal is to essentially create a model of two layered plates, which experience thermal stress induced by a temperature drop. I kept running into this message thread. I've tried many times but couldn't seem to find a way out! I've attached my file here!

Thanks a lot in advance for any feedbacks!

-Arthur

Attachments:

0 Replies Last Post Nov 9, 2013, 4:01 p.m. EST
COMSOL Moderator

Hello Arthur Chuang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content