Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
local and average heat transfer coefficients
Posted Nov 10, 2013, 10:25 p.m. EST Heat Transfer & Phase Change, Microfluidics Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I am trying to model 3D single phase flow with heat transfer in a rectangular duct. A rectangular heater area on the floor of the channel, halfway down the length, is used to heat the fluid. The heat flux is supplied as a step function. (x is the direction of the flow, y is along the width of the channel and z is the height). There are other effects involved, which I have left out here and therefore, a 3D simulation is necessary.
Using COMSOL, is it possible to determine local and average heat transfer coefficients with heat flux, surface and mean fluid temperatures?
Hello Kumar
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.