Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Unhelping Blog

Posted Dec 21, 2013, 3:44 a.m. EST 3 Replies

Mahmood Farman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Sorry to say but I found people here are very unhelping, even though they have a lot of expertise but even then they don't bother to help others. Knowledge is something that should be spread, not the way many of Comsolians behave.

And I am pretty sure that this post will be removed.
3 Replies Last Post Dec 23, 2013, 2:41 a.m. EST
Jim Freels mechanical side of nuclear engineering, multiphysics analysis, COMSOL specialist
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 21, 2013, 12:17 p.m. EST
Mahmood Farman, sorry to hear of your dismay. The blog only provides for comments, but this discussion forum is much more interactive between users. I searched through this discussion forum, and could not find many times when you have asked questions, and I could not find any where you did not receive an answer. Could you be more specific ? What question do you need an answer to ? Please be aware that all responses here are completely voluntary. If you can get things very simple, then usually the answers are easier to come by.
Mahmood Farman, sorry to hear of your dismay. The blog only provides for comments, but this discussion forum is much more interactive between users. I searched through this discussion forum, and could not find many times when you have asked questions, and I could not find any where you did not receive an answer. Could you be more specific ? What question do you need an answer to ? Please be aware that all responses here are completely voluntary. If you can get things very simple, then usually the answers are easier to come by.
Mahmood Farman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 23, 2013, 2:03 a.m. EST
Hy Freels, I am late but I was not expecting any reply from someone. Immense thanks for sparing your time. I have been trying past many many days but any comsolian did'nt help me and it was depressing as I am stuck in an issue from the past 2 months and all in vain.
Can you please check your email at f******d@o**.**v

Here I can explain you briefly that what I am trying to do is which study I should carry out for voltage induction from a rectangular beam of magnet to a simple coil?

What I am trying is Moving Mesh, Solid Mechanics for fixing one side of beam and applying force for displacement and Magnetic Field physics. I don't know that should I use these three physics collectively or it can be doe simply. I tried moving mesh model, transformer model but could not proceed.
And when I carry out time dependent study, I cannot simulate magnetic field along with moving mesh and solid mechanics and error is still intact.

Regards and waiting for your kind response.

Hy Freels, I am late but I was not expecting any reply from someone. Immense thanks for sparing your time. I have been trying past many many days but any comsolian did'nt help me and it was depressing as I am stuck in an issue from the past 2 months and all in vain. Can you please check your email at f******d@o**.**v Here I can explain you briefly that what I am trying to do is which study I should carry out for voltage induction from a rectangular beam of magnet to a simple coil? What I am trying is Moving Mesh, Solid Mechanics for fixing one side of beam and applying force for displacement and Magnetic Field physics. I don't know that should I use these three physics collectively or it can be doe simply. I tried moving mesh model, transformer model but could not proceed. And when I carry out time dependent study, I cannot simulate magnetic field along with moving mesh and solid mechanics and error is still intact. Regards and waiting for your kind response.
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 23, 2013, 2:41 a.m. EST
Mahmood, I suggest that you contact COMSOL Support.
Mahmood, I suggest that you contact COMSOL Support.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content