Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulation failed on 3D model with magnetic field, creeping flow and magnetophoretic force
Posted Dec 24, 2013, 8:29 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
I am doing some research about magnetophoresis using Comsol.
There are some questions about Comsol that simulation was successful on 2D model with magnetic field(,with or no currents), creeping flow and magnetophoretic force modulars, and it was successful on 3D model using magnetic field no current.
But when i created a 3D model, tried to use a current exciting magnetic field, the Comsol could not work out the particles magnetophoresis force, in that case, i found that the magnetic field gradient was 0 , the expressions: d(mf.Bx,x),d(mf.By,x),d(mf.Bx,x).......all were 0.
Has anyone done something like that? Or can anyone give some advice and help?
Thanks in anticipation
Hello Zhang XM
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
dear Zhang
I suggest you to take a look at this link:
www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB4QFjAA&url=http%3A%2F%2Fwww.comsol.com%2Fblogs%2Fplotting-spatial-derivatives-magnetic-field%2F&ei=RLH2VMiOL4-SyQSToIL4Bw&usg=AFQjCNHKzMqxMRW-C1JcUi4hRlduk-J2rg&bvm=bv.87519884,d.aWw
Happy Comsoling!
Amir