Edgar J. Kaiser
Certified Consultant
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Dec 26, 2013, 6:17 a.m. EST
Mikhail,
you could try to put together a meshing sequence generating swept meshes for one domain (strand) after the other. This should not be impacted by the point contacts.
Remains the problem to mesh the space between the strands. I don't have a suggestion there and due to the point contacts this will necessarily produce unfavourable element geometries and maybe current singularities.
Point contacts should be avoided.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Mikhail,
you could try to put together a meshing sequence generating swept meshes for one domain (strand) after the other. This should not be impacted by the point contacts.
Remains the problem to mesh the space between the strands. I don't have a suggestion there and due to the point contacts this will necessarily produce unfavourable element geometries and maybe current singularities.
Point contacts should be avoided.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
http://www.emphys.com
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Feb 11, 2014, 11:11 a.m. EST
Edgar,
Thank you. Could you please provide some details on swept meshing. All the time I get an error (Unsupported topology of linking face) when trying to do the following thing:
First I mesh several boundaries with free triangular (see attache file).
then I add swept to my Mesh-1 where I indicate source faces to be already meshed in previous step boundaries and destination faces as boundaries on the other side.
I've already recreated my geometry and turned point contacts into surface contacts (another attached file)
So what am I doing wrong? Or maybe its impossible to mesh the geometry with swept tool?
Edgar,
Thank you. Could you please provide some details on swept meshing. All the time I get an error (Unsupported topology of linking face) when trying to do the following thing:
First I mesh several boundaries with free triangular (see attache file).
then I add swept to my Mesh-1 where I indicate source faces to be already meshed in previous step boundaries and destination faces as boundaries on the other side.
I've already recreated my geometry and turned point contacts into surface contacts (another attached file)
So what am I doing wrong? Or maybe its impossible to mesh the geometry with swept tool?
Edgar J. Kaiser
Certified Consultant
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Feb 11, 2014, 12:18 p.m. EST
Mikhail,
the swept mesh needs a constant cross section along the sweeping direction. So the interpenetration of wires prevents it from success.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Mikhail,
the swept mesh needs a constant cross section along the sweeping direction. So the interpenetration of wires prevents it from success.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
http://www.emphys.com
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Feb 12, 2014, 4:03 a.m. EST
Thank you!
Thank you!
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Sep 4, 2014, 11:45 a.m. EDT
Hello,
Did you solve your meshing problem?, I am in a similar issue
Hello,
Did you solve your meshing problem?, I am in a similar issue
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Sep 1, 2015, 9:04 a.m. EDT
Hi Edxon
how are you ?
I want to ask a question. My question is related with twisted wire or wire coil mesh. Can you help me which type of mesh is suitable in this topic ?
Thank you
Hi Edxon
how are you ?
I want to ask a question. My question is related with twisted wire or wire coil mesh. Can you help me which type of mesh is suitable in this topic ?
Thank you