Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Microwave heting

Posted Jan 17, 2014, 8:48 a.m. EST RF & Microwave Engineering Version 4.3 0 Replies

Avinash Gupta
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, Everyone

I am using module of microwave heating, my problem is that, I have an X-band Rectangular Waveguide in which i placed a dielectric block (Refer to module = RF Heating Model ID: 6078) . Now i apply the input power of 100W to port 1 of waveguide for 0-300 seconds, (same as in the RF heating module). Actually I want to apply the input power for 0-100 seconds and after that apply 0W power to see the normal temperature behaviour inside the block, (How quickly the block Reach to its initial temperature).?
Refer to Microwave Oven model (Potato Cooling), If turn off the Oven after 10 seconds in What time potato reach to its normal temperature..??

Can anyone help me please..??

Thanks in Advance..
0 Replies Last Post Jan 17, 2014, 8:48 a.m. EST
COMSOL Moderator

Hello Avinash Gupta

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content