Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error in sweep

Posted Feb 17, 2014, 3:35 a.m. EST Version 4.4 0 Replies

Thanikachalam Jayaraj
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

following is the error occured during my optimization problem

Error in sweep: The following feature has encountered a problem:
The following feature has encountered a problem:
Failed to find a solution.
Out of memory during LU factorization.
Returned solution is not converged.
- Feature: Stationary Solver 2 (sol1/s2)

how can i overcome this ...
anybody please help me
0 Replies Last Post Feb 17, 2014, 3:35 a.m. EST
COMSOL Moderator

Hello Thanikachalam Jayaraj

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content