Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

moisture in wood

Posted Feb 17, 2014, 2:39 p.m. EST Heat Transfer & Phase Change Version 4.3 1 Reply

Feiza Mnasri
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello
I am treating a problem of heat and moisture transfer in a wood material,
I wanted to know what physical module should I use to study the term moisture and his evolution.
can anyone of you who have an idea help me please

Many thanks in advance

Best regards!
1 Reply Last Post Feb 18, 2014, 3:11 a.m. EST
Suresh Seetharam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 18, 2014, 3:11 a.m. EST
Hi,


This is easy in COMSOL. You need subsurface module or you can simply develop your own equations for heat and moisture transfer using PDEs.

If you are not familiar then download an example from the following link (choose 1/2 as it deals with heat and moisture only, because this is what you want):

www.comsol.com/community/exchange/11/


Suresh
Hi, This is easy in COMSOL. You need subsurface module or you can simply develop your own equations for heat and moisture transfer using PDEs. If you are not familiar then download an example from the following link (choose 1/2 as it deals with heat and moisture only, because this is what you want): http://www.comsol.com/community/exchange/11/ Suresh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content