Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

plot average values from "sub-domains"

Posted Feb 21, 2014, 12:20 p.m. EST Parameters, Variables, & Functions, Results & Visualization Version 4.4 0 Replies

Eric Scarfone
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

"Beginner level"
Hey
I would like to plot average values (ie. concentration) obtained from "sub-regions" inside a domain as a function of the position of these "sub-regions" in my geometry (here the y axis).

I can get the averages one by one using "Derived Values" as in the example (capture01.jpg) joined; but I can't get a plot of the table as it is. Given the large number of "sub-domains" I would have hoped to avoid going via Excel or the like!
Creating an Average data set from the predefined areas didn't help, I get an error message when I try to plot values from it.

Thanks for any advice.
Eric



Attachments:

0 Replies Last Post Feb 21, 2014, 12:20 p.m. EST
COMSOL Moderator

Hello Eric Scarfone

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content