Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Size Limitation of the probe table?
Posted Mar 11, 2014, 5:00 a.m. EDT Version 4.4 2 Replies
Please login with a confirmed email address before reporting spam
It seems there is a size limitation of the probe table to 9999 time steps/data lines.
The contents is treated like FIFO, i.e. the time steps computed first are replaced by later time steps.
Is that a fixed limit or something that can be adjusted?
The contents is treated like FIFO, i.e. the time steps computed first are replaced by later time steps.
Is that a fixed limit or something that can be adjusted?
2 Replies Last Post Mar 11, 2014, 5:32 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
The size of the buffer is 10,000 rows by default. You find that setting in the Probe Table node's settings window, under Storage. If you choose to store the table in a file instead of in the model, no size limitation applies.
Best regards,
Magnus RIngh, COMSOL
The size of the buffer is 10,000 rows by default. You find that setting in the Probe Table node's settings window, under Storage. If you choose to store the table in a file instead of in the model, no size limitation applies.
Best regards,
Magnus RIngh, COMSOL
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank You!