Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
A problem with two physics.
Posted Mar 19, 2014, 10:17 a.m. EDT Fluid & Heat, Microfluidics, Structural Mechanics Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello everyone,
I am trying to simulate a simple problem which includes a fluid channel and a piezoelectric splitter. I used two physics: "piezoelectric devices" and "laminar flow", each of them works fine by itself. I would like to see how the flow looks like when the splitter is deformed by applying a voltage, when I tried to plot the flow pressure distribution with deformation applied, it gave me an error as attached. The simulation file is also attached. (4.3a)
Anyone could help? Thanks!
Bodong
I am trying to simulate a simple problem which includes a fluid channel and a piezoelectric splitter. I used two physics: "piezoelectric devices" and "laminar flow", each of them works fine by itself. I would like to see how the flow looks like when the splitter is deformed by applying a voltage, when I tried to plot the flow pressure distribution with deformation applied, it gave me an error as attached. The simulation file is also attached. (4.3a)
Anyone could help? Thanks!
Bodong
Attachments:
1 Reply Last Post Mar 22, 2014, 8:19 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
up!