Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

File opening

Posted Mar 23, 2014, 2:35 p.m. EDT Porous Media Flow Version 4.3a 1 Reply

Raju Chowdhury
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How can I convert a COMSOL 3.3 file to 4.3a file. Very urgent.......................... Please help me. Has any earth science module in COMSOL 4.3a?: Please help as early as possible.
1 Reply Last Post Mar 24, 2014, 3:31 a.m. EDT
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 24, 2014, 3:31 a.m. EDT
You can't load a 3.3-file directly into 4.3a - you have to do it in two steps:

- Load the file into 3.5a. This version can read files created in earlier 3.x-versions.

- Save the converted file from 3.5a.

- Load the converted file into 4.3a. All 4.x-versions can read files created by 3.5a, but not by earlier 3.x-versions.
You can't load a 3.3-file directly into 4.3a - you have to do it in two steps: - Load the file into 3.5a. This version can read files created in earlier 3.x-versions. - Save the converted file from 3.5a. - Load the converted file into 4.3a. All 4.x-versions can read files created by 3.5a, but not by earlier 3.x-versions.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content