Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
problem in comsol program
Posted Mar 28, 2014, 5:01 a.m. EDT Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers 0 Replies
Please login with a confirmed email address before reporting spam
I defined two projects in comsol in 2D for solving richards equation:
first project: simple rectangle that left boundary was defined as pressure head=0.8 and right boundary as pressure head=0.5, the other two angles= zero flux
and then I made a cross section from these two points from 0.8 to 0.5 (attached cross section as picture1).
Second project: simple rectangle that left boundary was defined as step function for the pressure head from zero to 0.8 =0.8 and from 0.8 to 1.4=0, and for the right boundary pressure head was defined from zero to 0.5=0.5 and from 0.5 to 1.4= 0; the two other angles were zero flux.( attached plots for the left and right boundary as left and right boundary)
Expected results= that cross section for second project for pressure head from 0.8 to 0.5 should be the same as first project.(attached as cross section sample)
Comsol results=they are not like each other!!!!
Do you have any idea that what is the problem in comsol?
Thanks in advance for your valuable comments.
Sepideh
Hello Sepideh Ramezani
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.