Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

out-of-plane joule heating model (3D)

Posted Apr 9, 2014, 8:28 a.m. EDT Electromagnetic Heating, Heat Transfer & Phase Change Version 4.3b 0 Replies

Paolo Picciafoco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I've found in "Joule Heating (3D)" model a parameter called "out-of-plane", but I don't understand how it works. The documentation explains about the 2D models or convective/radiation nodes, but nothing about the 3D models. The default value is 1 meter (!!!).

PS: my geometry consists of a thin membrane (1mm x 1mm) of three layers: 200nm (heat transfer in solids model) + 180nm (joule heating model) + 200nm (heat transfer in solids model).

Thank for the help
0 Replies Last Post Apr 9, 2014, 8:28 a.m. EDT
COMSOL Moderator

Hello Paolo Picciafoco

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content