Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Not able to select Contact pair 1 in Contact pair boundary condition of Solid Mechanics Physics

Posted Apr 17, 2014, 5:52 a.m. EDT Structural Mechanics Version 4.3b 0 Replies

Jatin Kashyap
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi i am doing analysis of a cantilever subjected to point load at its end acting vertically downward, strike another cantilever just below it and transfer the load. The problem i am facing , i am not able to see "Contact Pair 1" automatically selected in Pair Selection of Contact setting window in "Solid Mechanics" Physics. Can anybody tell me why its not being selected. I had created the Contact pair manually under Definition because there was no common boundary among both the surfaces. I am attaching screenshot of it.
thank you

Attachments:

0 Replies Last Post Apr 17, 2014, 5:52 a.m. EDT
COMSOL Moderator

Hello Jatin Kashyap

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content