Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Measuring Induced voltage of Parrallel Coils

Posted Apr 28, 2014, 1:46 a.m. EDT Low-Frequency Electromagnetics, Studies & Solvers Version 4.1 0 Replies

RyanMulheron
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Would anyone be able to tell me why the induced voltage in the 2 outer coils in the attached model have a higher value than the centre coil? The measured Flux values are correct and the centre induced voltage match my calculations, however the outer coils do not.

Thanks,

--
Ryan Mulheron
0 Replies Last Post Apr 28, 2014, 1:46 a.m. EDT
COMSOL Moderator

Hello RyanMulheron

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content