Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Random displacement

Posted May 18, 2014, 11:51 a.m. EDT Low-Frequency Electromagnetics, Geometry Version 4.3b 0 Replies

Francesco Schillaci
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

I have designed a permanent magnet quadrupole. Its layout is based on a number of magnet and some iron parts. What I want to do now is to evaluate the mechanical tolerances I have thus I want to randomly move the different part and for each displacement I will study the harmonic contents of the magnetic field.
I was thinking to use the deformed mesh but it is not very clear to me how to control the displacements.
Could you give me some advice?
Is there any tutorial or example I can study and use as a reference?

Thanks
Francesco
0 Replies Last Post May 18, 2014, 11:51 a.m. EDT
COMSOL Moderator

Hello Francesco Schillaci

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content