Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Transfer:Partial Differential Equations for heat loss in metallic rod

Posted Jun 4, 2014, 3:25 p.m. EDT 1 Reply

Tariq Raza
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All !

If someone could pl. give me clue of governing partial differential equations needed for heat loss from a metallic (stainless steel) rod. Rod is about 20 cm in length and little less than 1cm in diameter taken out from oven at 60 C and placed at room temp. 25 C. I need to develop a model showing the heat loss behavior so any relevant information besides the governing equations is more than welcome.....

Thanks
1 Reply Last Post Jun 5, 2014, 5:32 a.m. EDT
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 5, 2014, 5:32 a.m. EDT
Maybe you can have a look at the example model in the model library -> heat transfer module -> tuturial models, forced and natural convection -> vacuum flask.
Maybe you also have to take radiation into account.
Maybe you can have a look at the example model in the model library -> heat transfer module -> tuturial models, forced and natural convection -> vacuum flask. Maybe you also have to take radiation into account.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content