Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Normal B boundary condition

Posted Jun 27, 2014, 6:53 a.m. EDT Low-Frequency Electromagnetics, Parameters, Variables, & Functions Version 4.3a 2 Replies

Victor Raposo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to define a normal B boundary condition in Magnetic field-No currents?
My idea is to simulate the top half of the geometry, which is enough due to symetry in some problems.
Thank you.
2 Replies Last Post Jun 30, 2014, 4:18 a.m. EDT
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 29, 2014, 9:12 p.m. EDT
Set a constant magnetic potential on the surface in question.
Set a constant magnetic potential on the surface in question.
Victor Raposo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jun 30, 2014, 4:18 a.m. EDT
Ok, thank you. It works.
Ok, thank you. It works.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content