Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Global subsequence not available in subsequence list

Posted Jul 11, 2014, 7:41 p.m. EDT Version 4.4 1 Reply

Ryan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have made a geometry subsequence in the global definitions but I cannot make it available in subsequence lists in subsequence call nodes. I've attached a screen shot to help illustrate the issue.

Am I doing something wrong? Is this a bug?
1 Reply Last Post Jul 22, 2014, 7:55 p.m. EDT
Ryan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Jul 22, 2014, 7:55 p.m. EDT
Solved my own issue. I was trying to call a 2D sequence in a 3D geometry. The correct procedure is to create a workplane in the 3D geometry and call the 2D sequence from inside the workplane.
Solved my own issue. I was trying to call a 2D sequence in a 3D geometry. The correct procedure is to create a workplane in the 3D geometry and call the 2D sequence from inside the workplane.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content