Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Conjugate heat transfer, Control Volume
Posted Jul 29, 2014, 9:58 a.m. EDT Fluid & Heat, Heat Transfer & Phase Change, Studies & Solvers Version 4.4 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to model heat transfer by convection using the conjugate heat transfer node. For doing this I need to model a control volume to represent the domain of the surrounding air. As it is explained in one of the COMSOL tutorials (Natural Convection Cooling of a Vacuum Flask), the best way to do it is to start with a small control volume, and expand it until the results do not change (the dimensions of the control volume influences the model). I'm using the parametric weep option to solve the model for different dimensions of the control volume (I'm making a parametric sweep of the dimensions of the control volume). I already know that at some point, the solver will crash for some control volume, do to not convergence or high computational cost. The question is: it is possible with COMSOL to make a parametric seep and to keep the solver running, even if for some of the parametric values the solver crashes? Or something like this?
Thank you!
David
Hello David Fernandez Bosman
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.