Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Converting Parametric Surface to Volume

Posted Jul 30, 2014, 9:01 a.m. EDT Fluid & Heat, Geometry Version 4.4 0 Replies

Oil_Sim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have data set of x y z data in excel. I used "interpolation" in the"global definition" and the" parametric surface" to create a surface geometry. I did this process to create two surfaces. Now I want to have the volume between these two surface as the volume for my meshing and fluid properties. Do you know how to convert the surfaces to volume?

Thanks,

0 Replies Last Post Jul 30, 2014, 9:01 a.m. EDT
COMSOL Moderator

Hello Oil_Sim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content