Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

connecting two plates which are joint by spot-weld with a formed nugget

Please login with a confirmed email address before reporting spam

Hello,

I am trying to simulate two plates which are joined together by spot-welding and a formed nugget. I have tried union and intersection, however, my intention is to have the nugget just in a small area of the connecting plates. Any hints or help would be greatly appreciated.

Regards,

Saeid

0 Replies Last Post Aug 14, 2014, 7:41 a.m. EDT
COMSOL Moderator

Hello Saeid Hatefipour

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.