Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Help needed with model to find acoustic transmission loss of a membrane.

Please login with a confirmed email address before reporting spam

I've been trying to 2 weeks now to get this model working with no joy so far.

It's a membrane with a mass attached to the centre. I have YM, PR & density for membrane & mass.

I need to calculate the transmission loss the membrane+mass provides to acoustic waves that pass through the membrane+mass.

I've tried to replicate an impedance tube within comsol using a long cuboid shape with the membrane-mass half way along. I've used 26 PMLs surrounding the cuboid to get rid of reflections.

I've been using intop1 & intop2 with either a plane wave radiation source on the source side wall, or a background field (the domain before the membrane-mass).

I've also read somewhere about adding face loads to the membrane-mass.

Any help in getting this model to work would be hugely beneficial,

Thanks





1 Reply Last Post Jan 11, 2015, 7:42 a.m. EST
COMSOL Moderator

Hello Tim Harley

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 10 years ago Jan 11, 2015, 7:42 a.m. EST
Hello! Do you have to solve this problem? When i calculated the transmission loss of a membrane, I meet the same quenstion. Can you help me to introduce how to solve this problem.
Thanks!
Hello! Do you have to solve this problem? When i calculated the transmission loss of a membrane, I meet the same quenstion. Can you help me to introduce how to solve this problem. Thanks!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.