Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Parameter as function of time in time dependent simulation

Posted Sep 11, 2014, 7:53 a.m. EDT Studies & Solvers Version 4.3a 2 Replies

Kishore Gajula
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How do i specify a parameter which is function of time in a time dependent simulation ??
in my case one of the parameter is function of time
2 Replies Last Post Sep 13, 2014, 1:18 a.m. EDT
Josh Thomas Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 11, 2014, 9:37 a.m. EDT
Kishore-

Under "Global Definitions" or "Definitions", right-click and add a "Variables" subnode.

Define your time dependent parameter using the edit fields.

--
Best regards,
Josh Thomas
AltaSim Technologies
Kishore- Under "Global Definitions" or "Definitions", right-click and add a "Variables" subnode. Define your time dependent parameter using the edit fields. -- Best regards, Josh Thomas AltaSim Technologies
Kishore Gajula
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 13, 2014, 1:18 a.m. EDT
Thanks
Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content