Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Falling Hydraulic Head

Posted Sep 15, 2014, 3:16 p.m. EDT Version 4.4 2 Replies

Mehrdad Bastani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi ,

I'm trying to build a 3D model of a groundwater flow from well1 to well2. We have a falling head in well1 (means the hydraulic head is going to be decreased during time) and head at well2 is constant. How can I introduce falling head in COMSOL 4.4?

Thanks
2 Replies Last Post Sep 30, 2014, 11:29 p.m. EDT
Mikael Noerregaard Nielsen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Sep 18, 2014, 7:34 a.m. EDT
I suppose you could define some function (under global definitions) matching the description of the movement of the head.

Best regards
I suppose you could define some function (under global definitions) matching the description of the movement of the head. Best regards
Mehrdad Bastani
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Sep 30, 2014, 11:29 p.m. EDT
Hi Mikael,

That worked! thank you for your advice.
Hi Mikael, That worked! thank you for your advice.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content