Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Flow Volatization (Boundary Not applicable)

Posted Oct 4, 2014, 2:25 a.m. EDT Version 4.4 1 Reply

David Harris
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to run simulations on evaporation. One of the boundary conditions I would like to use is flow boundary volatilization and No Flow boundary volatilization. However, I can't seem to select the boundaries. IT always says boundary not applicable. I have two different models. ONe is a model I am coming up with on my own and the other is an example from the following website www.comsol.com/model/download/178683/models.ssf.pesticide_transport.pdf
1 Reply Last Post Oct 4, 2014, 2:28 a.m. EDT
David Harris
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 4, 2014, 2:28 a.m. EDT
here is the files, I could not attach them last time
here is the files, I could not attach them last time

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content