Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

help me for pcf modeling

Please login with a confirmed email address before reporting spam

hi

i 'm doing a project about pcf(photonic crystal fiber), i choose the 2D pependicular hybrid-mode wave and select mode analysis, i set the subdomain & boundary & in properties i set the "specify eigen values using" for effective mode index & ... & generate mesh for that .
but i don't know what's the setting for finding effective mode index in solver parameters ? , i set it to a greater value of core index, but the result isn't good and don't show the effective mode(HE11 mode) and effective index
please help me for this problem

thanks a lot

3 Replies Last Post Apr 21, 2010, 6:04 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 21, 2010, 3:15 p.m. EDT
Hi

I beleive its what is already discussed a couple of times on the forum, try a search (just left for the [Go] just above) try Effective index, or mode index,

there you will find discussion susch as

www.comsol.com/community/forums/general/thread/3034/
Have fun Comsoling
Ivar
Hi I beleive its what is already discussed a couple of times on the forum, try a search (just left for the [Go] just above) try Effective index, or mode index, there you will find discussion susch as http://www.comsol.com/community/forums/general/thread/3034/ Have fun Comsoling Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 21, 2010, 5:29 p.m. EDT
hi dear,

thank you very much for your answer,but can i specify one propagation mode (for example HE11) in the femlab?
i want "neff" for basic propagation mode in the fiber that propagate maximum of power in the fiber & i don't want the maximum of the "neff"
but the femlab give me the maximum of the "neff", please help me for my problem.

thanks&bye
hi dear, thank you very much for your answer,but can i specify one propagation mode (for example HE11) in the femlab? i want "neff" for basic propagation mode in the fiber that propagate maximum of power in the fiber & i don't want the maximum of the "neff" but the femlab give me the maximum of the "neff", please help me for my problem. thanks&bye

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 21, 2010, 6:04 p.m. EDT
hi dear,

i perusal this paper:

www.medwelljournals.com/fulltext/ajit/2008/344-349.pdf

& i want to regenerate its results

thank you&bye
hi dear, i perusal this paper: www.medwelljournals.com/fulltext/ajit/2008/344-349.pdf & i want to regenerate its results thank you&bye

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.