Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to get the value in the 'Arrow Surface'

Posted Oct 14, 2014, 9:59 a.m. EDT RF & Microwave Engineering Version 4.3a 2 Replies

Zerong Yuan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I use the 'Arrow Surface' to scale my variable and the result is good.

BUT HOW I can get the specific value of my variable ?

I want to get the value in the position of every arrow tail.

THANKS!
2 Replies Last Post Oct 15, 2014, 3:42 a.m. EDT
Gunnar Andersson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 15, 2014, 2:27 a.m. EDT
Do as follows:

1. Select the Arrow Surface node in the Model Builder.
2. Right-click and select "Add Plot Data to Export" from the context menu.
3. In the Plot node that is created under Results > Export: Browse to a filename and click on Export.
Do as follows: 1. Select the Arrow Surface node in the Model Builder. 2. Right-click and select "Add Plot Data to Export" from the context menu. 3. In the Plot node that is created under Results > Export: Browse to a filename and click on Export.
Zerong Yuan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 15, 2014, 3:42 a.m. EDT
THANKS！I have solved my problem
THANKS！I have solved my problem

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content