Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Automatic remeshing problem in 'Deformed Geometry'

Posted Nov 5, 2014, 6:18 a.m. EST Geometry, Mesh Version 4.4 0 Replies

Shuai Yuan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone

I am trying to use 'Deformed Geometry' with automatic remeshing in the software to model erosion phenomenon of electrode under high current but during the automatic remeshing process the size of mesh was so larger than that of initial mesh that the solver prompted that it was not convergent. This problem confuses me a lot.

Thank all
Shuai Yuan
0 Replies Last Post Nov 5, 2014, 6:18 a.m. EST
COMSOL Moderator

Hello Shuai Yuan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content