Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

displacement phase in solid mechanics

Posted Nov 6, 2014, 12:40 p.m. EST Structural Mechanics Version 4.3b 0 Replies

Eric Wang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am working on a force vibration problem of a 3-D block. I use frequency domain and solid mechanics analysis. I applied prescribed displacement on one boundary. so the phase of displacement on this boundary is always zero. I would like to check the displacement phase shift on one line of the block other than the displacement boundary. I though the phase shift should be within 0 to 2*pi. However, when I extract the displacement phase data from Comsol 4.3b, the phase shift data is much larger than 2*pi. It looks comsol accumulate the phase shift instead of just calculating the exact phase. How could I obtain the right phase data from those extracted data? Thanks
0 Replies Last Post Nov 6, 2014, 12:40 p.m. EST
COMSOL Moderator

Hello Eric Wang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content