Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
surface integration for parametric sweep simulation
Posted Nov 14, 2014, 10:27 a.m. EST Low-Frequency Electromagnetics, Results & Visualization, Studies & Solvers Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I have performed a stationary electric current simulation with parametric sweep. I need to find the total current passing through a surface of my geometry and for the aim I have used the "surface integration" of the current density (ec.normJ) over the boundary of my interest but I get the following message:
"Table input type 'Stationary' does not match data input type 'Parameter value'. Try evaluating in another table".
Could someone explain me the error and mainly how to fix it in order to find the current values related to the parametric results??
I have performed a stationary electric current simulation with parametric sweep. I need to find the total current passing through a surface of my geometry and for the aim I have used the "surface integration" of the current density (ec.normJ) over the boundary of my interest but I get the following message:
"Table input type 'Stationary' does not match data input type 'Parameter value'. Try evaluating in another table".
Could someone explain me the error and mainly how to fix it in order to find the current values related to the parametric results??
1 Reply Last Post Nov 19, 2014, 3:18 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
What parameter do you sweep? I have swept a geometry parameter and integrated current without any difficulties. You need to tell more.
best wishes
Lasse
What parameter do you sweep? I have swept a geometry parameter and integrated current without any difficulties. You need to tell more.
best wishes
Lasse