Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Extract data from comsol to matlab
Posted Nov 28, 2014, 11:52 a.m. EST RF & Microwave Engineering, Interfacing, Results & Visualization Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Dear All,
I am running the parameter scan simulation. After that the case is extremely so that I can't open by GUI.
I want to check the integration of loss of one domain changing with three scanned parameter.
I need to extract these data from COMSOL to Matlab by livelink
How should I write the command in matlab script?
Thanks for the help in advance.
Best regards
Yanrui
I am running the parameter scan simulation. After that the case is extremely so that I can't open by GUI.
I want to check the integration of loss of one domain changing with three scanned parameter.
I need to extract these data from COMSOL to Matlab by livelink
How should I write the command in matlab script?
Thanks for the help in advance.
Best regards
Yanrui
1 Reply Last Post Dec 1, 2014, 4:22 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Dear Yanrui,
what you need is the command mphglobal, in your case
power= mphglobal(model,'int_v(emw.Qh)')
should do the job. See detailed answers in your support case.
Best regards,
Sven
what you need is the command mphglobal, in your case
power= mphglobal(model,'int_v(emw.Qh)')
should do the job. See detailed answers in your support case.
Best regards,
Sven