Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
About plots
Posted May 11, 2010, 9:41 a.m. EDT 3 Replies
Please login with a confirmed email address before reporting spam
Please i need somebody to help me, what i want to do is obtaining a graphic like this (download the attached file):
www.sendthisfile.com/QH3YqTyenQ7iO3XWAj5X3xsq
In that picture you can see the plot solution combined with the mesh. Can I do this with Comsol 3.5?
Additional I need to see the mesh numeration (elements and nodes) so i can navigate trough the mesh and know the different amount of for example von misses stress, deformation, etc, in each node of the mesh, please help me
3 Replies Last Post May 11, 2010, 11:39 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
the file is expired
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thanks for help me, this is the attached file
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello,
After solving your model, you may try Postprocessing>Plot Parameters>
At General tab, check Element selection and uncheck Element refinement and set Auto to 1.
At Surface tab, set Fill style to Wireframe.
Then you can have the plot you need.
Cheers,
David
After solving your model, you may try Postprocessing>Plot Parameters>
At General tab, check Element selection and uncheck Element refinement and set Auto to 1.
At Surface tab, set Fill style to Wireframe.
Then you can have the plot you need.
Cheers,
David