Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

inverted mesh element near coordinate

Posted Jan 15, 2015, 3:56 p.m. EST Low-Frequency Electromagnetics, Geometry, Mesh, Studies & Solvers, Structural Mechanics Version 4.4 1 Reply

Reza Kadkhodaee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi dear all

I want to see the mechanical changes due to flow of current through two parallel wires in COMSOL. To do this, first I used two "magnetic field" and "solid mechanic" modules. After getting the results I noticed there is no filed change resulted by mechanical changes which happens due to magnetic forces. After reading previous discussion, I used "moving mesh" module to execute the changes. But then I faced this error:
"inverted mesh element near coordinate"
What I have to do in order to solve the error?

I used this terms in my modeling:
1)free deformed(for all domain, 2-wire and air)
2)prescribe mesh displacement(just for boundary of wire )

With best thanks and regards
1 Reply Last Post Apr 27, 2016, 10:09 a.m. EDT
COMSOL Moderator

Hello Reza Kadkhodaee

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Simona Migliozzi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Apr 27, 2016, 10:09 a.m. EDT
Hi Reza,

I have exactly the same problem although I used the prescribed deformation in all domain instead of free deformation but I think that it's the same thing. However, have you solved your problem??

Thanks a lot

Simona

Hi Reza, I have exactly the same problem although I used the prescribed deformation in all domain instead of free deformation but I think that it's the same thing. However, have you solved your problem?? Thanks a lot Simona

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content