Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling Anisotropic metamaterials

Posted Feb 21, 2015, 4:38 p.m. EST Low-Frequency Electromagnetics, Modeling Tools & Definitions 1 Reply

Harvijay Singh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to specify permittivity and permeability values of an anisotropic material directly in cylindrical coordinates i.e εr,εθ and εz in the RF solver or it needs to be converted to cartesian coordinate system first?
1 Reply Last Post Oct 28, 2015, 6:20 a.m. EDT
COMSOL Moderator

Hello Harvijay Singh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Rafael Barea del Cerro
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Oct 28, 2015, 6:20 a.m. EDT

Is it possible to specify permittivity and permeability values of an anisotropic material directly in cylindrical coordinates i.e εr,εθ and εz in the RF solver or it needs to be converted to cartesian coordinate system first?

I have same problem. I try to define a cilidrical coordinate and use de properties in function of sys.r that is the r in the cylindrical properties.
But I have two cilidres no parallel and I don`t know how do it.

Please, Somebody know how to do it or where can i looking for information about this.
[QUOTE] Is it possible to specify permittivity and permeability values of an anisotropic material directly in cylindrical coordinates i.e εr,εθ and εz in the RF solver or it needs to be converted to cartesian coordinate system first? [/QUOTE] I have same problem. I try to define a cilidrical coordinate and use de properties in function of sys.r that is the r in the cylindrical properties. But I have two cilidres no parallel and I don`t know how do it. Please, Somebody know how to do it or where can i looking for information about this.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content