Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using Time-dependent vs Frequency study for single DC pulse

Please login with a confirmed email address before reporting spam

Good day,

I am modelling a scenario where a single 100 microsecond DC pulse is passed through a coil. Is it better to use a Time-dependent study or a frequency study set to 10000Hz to model the eddy currents and the skin effect?

3 Replies Last Post Jun 16, 2016, 5:21 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 10 years ago Mar 7, 2015, 8:44 p.m. EST
Hi:
for your question,Maybe you can use the transient solution,and You should define a time pulse function as your input.
Hi: for your question,Maybe you can use the transient solution,and You should define a time pulse function as your input.

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Sep 25, 2015, 1:59 a.m. EDT
which field shoud i use, i want to simulate the skin effect but with high frequency pulse DC power
which field shoud i use, i want to simulate the skin effect but with high frequency pulse DC power

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Jun 16, 2016, 5:21 a.m. EDT
Have you solved the problem? My study has also such an exicitation.
Have you solved the problem? My study has also such an exicitation.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.