Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
bouyancy effect
Posted Mar 8, 2015, 1:24 p.m. EDT Heat Transfer & Phase Change Version 5.0 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I found that with the multiphysics module using laminar flow and heat conduction in solids
on air in a closed cavity with temperature defined boundaries and gravity volume force I get
flow patterns. Does this simulate the bouyancy effect correctly?
From my experience, the heat transfer module (with conjugate heat transfer) is needed if you have a heat
source in the model plus a fluid flowing in
but in the above example the multiphysics model seems to be enough
thanks
David
I found that with the multiphysics module using laminar flow and heat conduction in solids
on air in a closed cavity with temperature defined boundaries and gravity volume force I get
flow patterns. Does this simulate the bouyancy effect correctly?
From my experience, the heat transfer module (with conjugate heat transfer) is needed if you have a heat
source in the model plus a fluid flowing in
but in the above example the multiphysics model seems to be enough
thanks
David
1 Reply Last Post Mar 8, 2015, 10:12 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi:
for your question ,I suggest you look at the case.
for your question ,I suggest you look at the case.
Attachments: