Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Artefact on the periodic boundary

Please login with a confirmed email address before reporting spam

Hi all,

I am trying to reproduce the results for the structure studied in Phys. Rev. B 85, 245401 (2012). (I have attached the schematic of the plasmonic structure.)

I can obtain a reflection dip around 650 nm as expected, however there are some small unwanted dips in my spectrum. I checked the E-field distribution and I see that there is a strange field confinement on the dielectric sides, which is unusual since I use periodic boundary conditions. I believe this causes some additional reflections, and therefore I cannot obtain a clean spectrum as in the paper. Do you have any suggestions to get rid of the field on the dielectric boundary?

Thank you,
Semih


0 Replies Last Post Apr 14, 2015, 8:02 p.m. EDT
COMSOL Moderator

Hello Semih Cakmakyapan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.