Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Si Solar Cell simulation with COMSOL 4.4 and Semiconductor module
Posted Apr 15, 2015, 12:30 p.m. EDT Semiconductor Devices Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I'm trying to get a proper IV curve that has a Jsc and a Voc but instead I get a linear IV graph. I don't know what I'm doing wrong. I don't think it's taking into account the user defined generation I added, because if it did the current should not be 0 when the applied voltage is 0 too.
I am using the semiconductor module and Si is my material. I used part of the YouTube tutorial to find my generation term G www.youtube.com/watch?v=zeJKw1N6a7I . I am using two Ohmic contacts one as ground and one as a parameter to sweep for the IV curve.
Any help is appreciated.
mph file: www.dropbox.com/s/ncznalf8hbuuraz/IV.mph?dl=0
Hello Qusai Al Shidi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
also i am trying to simulate for obtain the IV curve for the solar cell, and I think that you have wrong value for the I (A) in IV node if you have any help or solution she's welcome