Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Unexpected large displacement in time dependant solver, piezoelectric Devices

Please login with a confirmed email address before reporting spam

Hi,

I develop a model to analyse the frequency and transient response from a piezoelectric element (GaPO4). When I did the frequency response, I set the voltage of terminal 1 to 1 and when I did the frequency response, I changed the voltage of terminal 1 to pw2(t) which is 6 cycled sin wave. The result looks fine for frequency response in terms of impedance and displacement. However, when I choose one of the frequency to do time dependant analysis, the displacement became 10^18 rather than the order of 10^-10 to 10^-13 [m]. Which is weird.

This model works fine if I changed to material to PZT-5A for both frequency and time dependant solver . Any one can help me to check where is wrong with my model.

Regards,
Liang


0 Replies Last Post Apr 16, 2015, 7:02 a.m. EDT
COMSOL Moderator

Hello Liang Cheng

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.