Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

selection

Posted May 12, 2015, 6:33 p.m. EDT Version 5.2 2 Replies

Dana Akil
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi every one
I am trying to simulate ( room modes in the acoustic frequency domain) in the library
but the selection button in the results is not active
could one tell me what is the problem
2 Replies Last Post May 5, 2016, 5:03 p.m. EDT
COMSOL Moderator

Hello Dana Akil

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Yawen Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 5, 2016, 4:01 a.m. EDT
Have you solved this problem？I meet the same one.
Have you solved this problem？I meet the same one.
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago May 5, 2016, 5:03 p.m. EDT
Hello Dana,
The data set Study 1/Solution 1 in this model already has a selection node attached to it, so the Selection button on the Results ribbon is greyed out.
Best,
Jeff
Hello Dana, The data set Study 1/Solution 1 in this model already has a selection node attached to it, so the Selection button on the Results ribbon is greyed out. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content