Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Merge two mesh

Posted Aug 8, 2010, 7:05 a.m. EDT Mesh Version 3.5a 2 Replies

Mashallah Rezakazemi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I want to merge 2 mesh. A cylinder with a slab. How can I do that?
2 Replies Last Post Apr 27, 2013, 11:18 a.m. EDT
COMSOL Moderator

Hello Mashallah Rezakazemi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Prisca Marianelli
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 27, 2011, 4:42 a.m. EDT
Hi,
I've got a similar problem. I would like to merge two meshes imported from Matlab in Comsol 3.5a.
At p. 132 of Matlab Interface Guide, it is explicitly written "Importing a mesh from a file removes all geometry objects from the current geometry".
Therefore, I saved each imported mesh into a separate .mph file (I payed attention to create geometry from mesh before saving each file). Then, I used File -> Merge Component, but it doesn't work.
Any tip or suggestion to overcome this difficulty?
Many thanks in advance!
Best Regards,
PM
Hi, I've got a similar problem. I would like to merge two meshes imported from Matlab in Comsol 3.5a. At p. 132 of Matlab Interface Guide, it is explicitly written "Importing a mesh from a file removes all geometry objects from the current geometry". Therefore, I saved each imported mesh into a separate .mph file (I payed attention to create geometry from mesh before saving each file). Then, I used File -> Merge Component, but it doesn't work. Any tip or suggestion to overcome this difficulty? Many thanks in advance! Best Regards, PM
Yuan Hao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 27, 2013, 11:18 a.m. EDT
Hi, I have meet the same problem, did anyone solve this problem?
Hi, I have meet the same problem, did anyone solve this problem?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content