Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coupling Magnetic fields, No current with Solid mechanics, and Moving mesh
Posted Jun 28, 2015, 8:06 p.m. EDT Low-Frequency Electromagnetics, MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 5.1 0 Replies
Please login with a confirmed email address before reporting spam
I'm working on coupled cantilever bridges with magnets on the center of each bridges. I want to get amplitude vs frequency plot for different eigen mode in frequency domain analysis. In order to get different mode I have to apply load force to excite the bridges in different way. Since I'm using neodymium, if I excite one bridge, the other one is suppose to follow the movement(reverse polarities), but my 3 D plot only shows the deformation of excited bridge. Please see attached file and give me some helps.
Thanks in advance,
Wenyuan
Attachments:
Hello Wenyuan Zhu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.