Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Livelink Matlab. Running processed data back to comsol

Please login with a confirmed email address before reporting spam

Hello Comsol community,

Is there an straight forward way to send modified meshed data back to comsol after processing it with Matlab?
Let me explain. I am reading a certain variable from a domain, from study 1. Using the data of each point of the grid, I calculated the effect over an specific set of variables. I want to send this variables back to Comsol for study2.

I know is possible to do it in one go with Comsol, but only when you have one result from the previous study. But I am making a scan over 3 parameters and selecting a certain type of eigenmodes per combination. Which I do via Matlab since I could not find a way to do it with Comsol.
After the selection, I want to run a second study for each case.

Do I make any sense?

By the way, I am not changing the grid. And I am taking the values via mpheval()

Many thanks in advance for any help or suggestions.

1 Reply Last Post Dec 8, 2015, 6:36 p.m. EST
COMSOL Moderator

Hello Marco Porcel

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 9 years ago Dec 8, 2015, 6:36 p.m. EST
Hi Marco, have you solved this issue? Can you please share some ideas?
Hi Marco, have you solved this issue? Can you please share some ideas?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.