Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Flow through a vertical 2-way manifold

Posted Jul 27, 2015, 10:29 a.m. EDT 0 Replies

Dennis Broek
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For a project I am currently working on I am trying to model the cooling water-flow distribution over a vertical 2-way pipe manifold with dispersed coarse particles. In the current operation the cooling water-flow is distributed asymmetrically over the lateral pipes causing several issues in the downstream operations.

As I am completely new to using COMSOL, I am finding it hard to get the geometry of the system in place. My initial thought was to bring in a vertical cylinder and to connect it with two horizontal cylinders to represent the manifold.

Can someone explain to me how to get the three cylinders connected where it represents a 3D 2-way manifold through which the fluid/particles flow can modeled?
0 Replies Last Post Jul 27, 2015, 10:29 a.m. EDT
COMSOL Moderator

Hello Dennis Broek

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content