Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

2D Lithium ion battery module

Posted Sep 8, 2010, 1:47 p.m. EDT 0 Replies

C.Lim
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I like to make a 2D simulation using Lithium ion battery module.

I followed the 1D model which is in model library for negative electrode and electrolyte.

However, I used non-porous electrode for positive electrode.

For positive electrode, I gave a total current as a boundary condition in electrolyte-electrode interface section.

I also add a transport diluted species module for diffusion of inside positive electrode.

But the simulation is not working at all.

Can you give me some advise for my model?


Thanks,
Cheolwoong
0 Replies Last Post Sep 8, 2010, 1:47 p.m. EDT
COMSOL Moderator

Hello C.Lim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content