Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

varying of beam deformation Vs pressure appilied

Please login with a confirmed email address before reporting spam

Hello, I would like to say that i have choosen solid mechanics physics, stationary study but when i vary the pressure on deforming surface of my cantilever beam that surface deforms but when i vary the pressure deformation does not vary with any range of pressure applied. please somebody help me to find out the solution. I am using comsol 4.3

2 Replies Last Post Nov 25, 2015, 1:34 a.m. EST
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Nov 24, 2015, 8:19 a.m. EST
Note that the deformations that are shown on screen are scaled, so although the deformations may look identical between two models they may have different amplitudes.
Jeff
Note that the deformations that are shown on screen are scaled, so although the deformations may look identical between two models they may have different amplitudes. Jeff

Please login with a confirmed email address before reporting spam

Posted: 9 years ago Nov 25, 2015, 1:34 a.m. EST

Note that the deformations that are shown on screen are scaled, so although the deformations may look identical between two models they may have different amplitudes.
Jeff


Sir, thanks for your kind reply... sir one more question, I want to get curve between applied pressure and resulting resistance. Here i am using polysilicon(piezoresistive) as deforming structure.How can i get that?
[QUOTE] Note that the deformations that are shown on screen are scaled, so although the deformations may look identical between two models they may have different amplitudes. Jeff [/QUOTE] Sir, thanks for your kind reply... sir one more question, I want to get curve between applied pressure and resulting resistance. Here i am using polysilicon(piezoresistive) as deforming structure.How can i get that?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.